Frozen rotors are simply the best brake rotors money can buy. Serious drivers-those who tend to cross the finish line first--take their edge where they find it. And a growing number of them have embraced the edge that they’ve found in cryogenically treated brake rotors. Here’s why: they resist cracking, warping and fading; frozen rotors last 2-3 times longer than normal rotors; they stop consistently, lap after lap. Sold each, cross drilled.

General Fitment

High performance lowest dust rating pads for prestice imports and faster street driving. There are two reasons our customers love redstuff. First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge was as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as original pads or better) and just get better as they heat up.

this material is a kevlar fibre based brake compound enhanced with ceramic particles. If you have previously tried ebc redstuf (pre-ceramic compound) this matierial is light years ahead. It lasts longer, it brakes be...(choose a part on the right to read more)

General Fitment

Fits: GT3 r/rs (99-03), GT3-cup (98-04), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-01), c2 3.4 (98-01), 3.2 03 - (03-04), 3.2 -02 (00-02), 2.7 03- (03-04), 2.7 -02 (00-02), 2.5 (97-99)

General Fitment

Gruppe m ram air intake system Porsche 996 GT2 01-05

The gruppem ram air intake system was created to improve efficiency by reducing the restrictions of a stock intake. A factory intake system is designed to minimize cost and reduce noise within the cabin, but these tradeoffs also sacrifice performance. To increase efficiency and power, gruppem has worked to reduce restriction and decrease the intake air temperature. Colder air is denser allowing the intake system to move a larger volume of air and in turn make more power. The shape of the duct and filter are designed specifically to increase the velocity of the air and increase the pressure, while at the same time fitting within engine bays cramped spac...(choose a part on the right to read more)

General Fitment

For use on factory driver or passenger side seats (due to some factory options, this unit may not work on all driver side seats with seat in the lowest position). Silver in color, fire extinguisher not included.

General Fitment

Endless ewig n35s racing front brake pads Porsche Boxster 3.2s 05-07

Endless develops high performance brake solutions for the most demanding competition usage from wrc rally teams, british touring cars, australian v8 touring cars and much more, for short sprint races to extreme endurance races. In addition to the range of competition brake pads, endless has also developed a range of high performance street pads which will also let you tackle track work with ease.

N35s has a very good initial bite and represents a straighter line between initial bite and brake power. It is easy to control and a special characteristic is that the driver can initiate light braking with a slight touch of the pedal and ...(choose a part on the right to read more)

General Fitment

Quicksilver sports system inc. Race-cats Porsche 911 GT2 (996) 2001-06

Sound is a major part of the driving experience. Factory exhausts utilize silencers that have been designed to meet several regulations and in turn rob the driver of performance and a sport tone.

Quicksilver's developed an exhaust that meets the expectations of drivers seeking a performance sound from their exhausts and more performance. Weight has been reduced, aesthetics improved and performance increased with better thottle response and more power.


Features:

Unique crisp sound rising in proportion with rpm.

General Fitment

Stoptech big brake kit rear slotted black caliper Porsche 996 GT2 2004

first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that optima...(choose a part on the right to read more)

General Fitment

Set of two sealed monoball cartridges - front or rear. Most Porsche owners today, especially those of us who take our cars to the track, have equipped our cars with tires much wider and stickier than stock, which allows higher g-forces to be achieved in cornering and braking. During that type of hard driving, rubber suspension bushings are compressed and flexed by the extreme loads being put on them, defeating your car's finely tuned alignment settings, thereby reducing your braking and cornering potential. Monoballs are a downside-free improvement; because they eliminate four important sources of suspension slop without making your car's ride harsher. Your Porsche will handle and brake with greater precision...(choose a part on the right to read more)

General Fitment

Known as: moulding driver's side rootwood light

View/Change Diagram

Boxster 1997-04 - Body	911 1998-05 - Body
911 Turbo/GT2 2001-05 - Body

Known as: driver

View/Change Diagram

911 Turbo/GT2 2001-05 - Transmission	911 Turbo/GT2 2001-05 - Transmission
911 Turbo/GT2 2007-09 - Transmission	911 Turbo/GT2 2007-09 - Transmission
911 Turbo/GT2 2010-13 - Transmission	911 GT3 2003-05 - Transmission
911 GT3 2007-11 - Transmission	911 GT3 2007-11 - Transmission

Known as: wiring harness driver's door

View/Change Diagram

Boxster 1997-04 - Electrical	911 1998-05 - Electrical
911 Turbo/GT2 2001-05 - Electrical	911 GT3 2003-05 - Electrical

Known as: cable driver's side for seat-belt tensioner

View/Change Diagram

Boxster 1997-04 - Body	911 1998-05 - Body
911 1998-05 - Body	911 Turbo/GT2 2001-05 - Body
911 Turbo/GT2 2001-05 - Body	911 GT3 2003-05 - Body

Known as: driver

View/Change Diagram

911 Turbo/GT2 2001-05 - Engine	911 Turbo/GT2 2007-09 - Engine
911 Turbo/GT2 2010-13 - Engine	911 GT3 2003-05 - Engine
911 GT3 2007-11 - Engine

View/Change Diagram

Boxster 1997-04 - Front Axle/Steering	911 1998-05 - Front Axle/Steering
911 Turbo/GT2 2001-05 - Front Axle/Steering

View/Change Diagram

Boxster 1997-04 - Front Axle/Steering	911 1998-05 - Front Axle/Steering
911 Turbo/GT2 2001-05 - Front Axle/Steering

View/Change Diagram

Boxster 1997-04 - Front Axle/Steering	911 1998-05 - Front Axle/Steering
911 Turbo/GT2 2001-05 - Front Axle/Steering

View/Change Diagram

Boxster 1997-04 - Front Axle/Steering	911 1998-05 - Front Axle/Steering
911 Turbo/GT2 2001-05 - Front Axle/Steering

46mm monotube shock absorber setting: b6 heavy duty (hd) drive type: awd position: rear quantity per vehicle: 2 bilstein b6 heavy duty monotube gas pressure shocks and struts are the ideal choice for most vehicles, including full-size sedans, suvs and trucks. These shocks provide improved handling and stability, without sacrificing ride comfort. They offer super damping ability that makes them ideal for the driver who demands superior performance, while maintaining an exceptional street ride. (yellow paint, steel body)

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This is a complete floor carpet kit for cabrio models. This set is a lightweight fine German velour that is trimmed in vinyl. Each is cut, sewn and trimmed to fit perfectly. Driver's side vinyl heel pad and side pads (like original) is also included. Made in Germany. Sold as a set. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Twintube strut assembly setting: b6 heavy duty (hd) drive type: awd position: front quantity per vehicle: 2 bilstein b6 heavy duty gas pressure shocks and struts are the ideal choice for most vehicles, including full-size sedans, suvs and trucks. These shocks provide improved handling and stability, without sacrificing ride comfort. They offer super damping ability that makes them ideal for the driver who demands superior performance, while maintaining an exceptional street ride. (green paint, steel body)

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This is an original replacement door panel that is a perfect reproduction made in Germany. Features: period correct material with the correct graining water resistant fiberboard base layer of sound absorption foam perforations are die cut for superior fitment made in Germany sold individually. 1 necessary per car. If you would like a set, the driver's side is part # 993555031700eql

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.